The eCam facilitates electronic locking for quarter-turns and other latching without the need to change doors or panels on machine controls, machine guards, control and data housings, so ensuring major time and cost savings over the alternative of re-installing new cabinets. eCam is UL and DIN certified.
Other applications for eCam include trailers, mobile homes and RVs where it enables multiple locking/unlocking from a remote central point.
Each door latch/lock may be selected to suit the individual door so that it engages into the eCam. Variants of eCam include no-status-indicator, status-indicator-included or with-status-indicator-and-automatic-unlock in case of power failure. Supply voltage required is in the range 9V � 32V and emergency opening is facilitated by means of a bowden cable mounting kit if required. A video of the eCam operation can be viewed at www.emkablog.co.uk/videos/.
The �safety� version in particular opens up completely new applications in machine and switchboard cabinet construction. Due to the type approval according to EN ISO 14119 as �position switch, design type 1� (Machinery Directive) and EN ISO 13449 as �monitoring device with performance level d,� eCam can be used as a monitoring element for machine housings or switchboard cabinet doors. eCam signals an open door to a higher-level control system, which ensures that a machine is taken out of service or a cabinet is powered off.
Further information on the eCam system from EMKA can be found at www.emka.com/uk_en/transport-road-latches-and-handles/electromechanical-locks-871/. Readers can find the latest information and news on the EMKA blog � www.emkablog.co.uk or follow them on Twitter - http://twitter.com/emkauk.
