DUBLIN--(BUSINESS WIRE)--The "Automotive Radar Dismantling and Cost Analysis, 2019-2020" report has been added to ResearchAndMarkets.com's offering.

It is in this report that over a dozen of millimeter-wave radar types are studied on design, supply chain and cost, including Continental's ARS4A, ARS4B, ARS408 and ARS410, Bosch's LRR4, FR5CP, MRR1PLUS, and MRR Rear, Aptiv's RACam and SRR3, Veoneer's MRRV1, Valeo's MBHL2, ZF's AC1000, Denso's HYQDNWR010, etc. Some of them are dismantled and illustrated in detail.

Automotive MMW radar is mainly comprised of a planar printed antenna, RF IC (generally called MMIC) and DSP-contained MCU. The fast Fourier transformation (FFT) of radar is a special operation, mostly fulfilled by separate external FPGA or DSP in the past. Freescale built DSP into MCU for the first time, improving the integration observably. Also, there are a few external DSP designs for the time being. Auxiliary IC encompasses power management, VCO, low-noise amplifier LNA, CAN transceiver, among others. MCU is often offered by NXP's 577x series or 567x series.

MMIC, though with a small share in costs, is crucial to both total cost and performance, really making a big difference in costs between radars. For example, the MR2001 radar chipset consists of two transmitters and three receivers. A simple mid-range radar only needs a chipset, but a long-range radar with higher resolution demands more chipsets, like ARS 4A with one more transmitter and three more receivers.

The RF board employs an asymmetric structure based on a hybrid PTFE/FR4 substrate and is provided with a planar antenna which is hard to produce. RF board is costly since 80 percent of substrate materials are now monopolized by Rogers RO3003 ED G2 (Japanese companies use Panasonic R5515).

For special radar structures, the baseband board and the RF board are as usual separated by an aluminum-zinc alloy die-casting board whose edges are connected to the radar plastic housing via shockproof rubber in order to meet the waterproof and shockproof requirements of automotive standards as well as to avoid interference to the RF board.

The plastic cover on the antenna of automotive radar takes into account the microwave transmission effect. Vendors attach great importance to the thickness, material and shape of the plastic cover, which is part of the radar design. Generally speaking, they prefer materials with ultra-low dielectric coefficient and surprisingly low losses as well as resistance to dust, water and vibration to cater to automotive grade. Bosch used PEI in the early days and later turned to PBT-GF30 provided by BASF, while Continental has adhered to PBT-GF30 invariably. Valeo and Aptiv replace expensive PBT with SPS for 24GHz radar, and they are studying how to apply it to 77GHz radar.

Key Topics Covered:

1 Trends of Automotive Millimeter-wave Radar Technology

1.1 Automotive Radar Industry Chain

1.2 Development Course of Automotive Radar

1.3 Development Course of Automotive Radar

1.4 Application Trends of Radar in L3 / L4 Era

1.5 Bandwidth and Frequency of Radar

1.6 Typical FMCW Radar Theory

1.7 Typical Automotive Radar Framework

1.8 Key Component Supply Chain of Automotive Radar

1.9 Trends of Automotive Radar RF Transceiver Chip Industry

1.10 Mainstream Radar Designs and Core Component Suppliers

2 Automotive Millimeter-wave Radar Cost

2.1 Cost Analysis of Automotive Radar

2.2 Cost Structure of Mainstream Radars

3 Dismantling of Tesla ARS-4B Radar

3.1 Introduction

3.2 Parameters

3.3 Cost Structure

3.4 Baseband Board

3.5 Back of Baseband Board

3.6 Front of RF Board: the shield is not disassembled

3.7 Features of Flat Printed Antenna

3.8 Removal of Shield

3.9 Empty Board with RF IC Removed

3.10 Back of RF Board

4 Dismantling of Mercedes-Benz C/E-Class Radar ARS-410

4.1 Overview

4.2 Front and Back of RF Board

4.3 Front and Back of Baseband Board

4.4 MR2001 Framework

4.5 MR2001T Framework

4.6 MPC577xK Framework

5 Dismantling of Bosch MRR Radar Family

5.1 Front and Back of RF Board

5.2 Parameters of Bosch MRR Radar

5.3 Cost Analysis of Forward Radar

5.4 Front and Back of RF Board

5.5 Front and Back of Forward Radar RF Board

5.6 Front and Back of Forward Radar Power Board

5.7 Structural Parts of Forward Radar

6 Dismantling of Valeo MBHL2 Radar

6.1 Overview

6.2 24GHz Radar Customers

6.3 MBHL2 Radar Cost

6.4 Front of MBHL2 Baseband Board

6.5 Back of MBHL2 Baseband Board

6.6 Front of MBHL2 RF Board

6.7 Back of MBHL2 RF Board

7 Continental SRR3-B 24GHz Radar

7.1 Overview

7.2 Front and Back of SRR3-B Baseband Board

7.3 Front and Back of SRR3-B RF Board

7.4 Front and Back of AC1000 RF Board

7.5 Front and Back of AC1000 Baseband Board

7.6 AC1000 Housing

8 Dismantling of Denso HYQDNMWR010 Radar

8.1 Overview

8.2 Front and Back of RF Board

8.3 Front and Back of Baseband Board

8.4 Cost Analysis

Companies Mentioned

• Bosch
• Continental
• Denso
• Mercedes-Benz
• Tesla
• Valeo

For more information about this report visit https://www.researchandmarkets.com/r/np2oy5

Contacts

ResearchAndMarkets.com

Laura Wood, Senior Press Manager

[email protected]
For E.S.T Office Hours Call 1-917-300-0470

For U.S./CAN Toll Free Call 1-800-526-8630

For GMT Office Hours Call +353-1-416-8900